Main Page
Jump to navigation
Jump to search
Welcome to the SEGGER - Support Wiki
Debug Probes - J-Link & J-Trace
J-Link
Troubleshooting
- Debug session does not start
- J-Link can't connect to the CPU
- J-Link shown as generic BULK device in Windows
- J-Link-OB SAM3U
- J-Link-OB-RX621-ARM-SWD
- SPI Flash
- Unlimited Number of Breakpoints in Flash
Device specifics
Intel
NXP
- Kinetis Series Devices
- LPC series - EMC buffer
- Connecting J-Link to LPCXpresso LPC1769
- Using LPC-Link 2 on LPCXpresso V2/V3
- IMX6SX
- IMX6DQ
- iMX7D
- Dual Core Debugging on LPC4350 with Embedded Studio
- Triple Core Debugging on LPC4367 with Embedded Studio
Renesas
Silicon Labs
ST
- Connecting to STM32 Nucleo boards
- Using SWO on STM327xxG evaluation boards
- Setting read out protection on STM32F0 devices
- Secured ST device detected
- SPC560D-Discovery Evalboard
- STM32
TI
Toshiba
Evaluation board specifics
Atmel
Renesas
Silicon Labs
NXP
Open Flashloader
J-Trace
TRACE
- General notes for trace configuration
- Tracing on Infineon XMC4400 series MCUs
- Tracing on Infineon XMC4500 series MCUs
- Tracing on NXP Kinetis MK60N512