Flasher Hub - Registration

Flasher Hub and all other Flasher programmers by SEGGER can be registered. Registration is a requirement for Technical Support.

How to register

Registration utility

The J-Link Registration utility can be used to register Flasher Hub and other Flashers. For more information, refer to J-Link Registration.

Note:

Flasher Hub modules would need to be disconnected from Flasher Hub and connected to PC to allow registration via the J-Link Registration utility.

This can be tedious and may not even be possible in some setups. As a way to allow registration without needing to change connections, the Flasher Hub web interface can be used, instead.

Web interface

Module registration in web interface

Registration form

Make sure that Flasher Hub and all connected modules are updated to their latest firmware.

The Flasher Hub web interface can be used to register connected modules:

1. Open the Flasher Hub web interface
2. Go to Configuration > Flasher Modules
3. In the overview, click the Register button for the module to register
4. Fill and submit the registration form
5. The module is now registered