Renesas RX14T
Jump to navigation
Jump to search
The Renesas RX14T are microcontrollers from Renesas, which are based on the RXv2 architecture.
Flash Banks
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Data area | 0x100000 |  |
|
Default | 4 KB |
| User area | 0xFFFE0000 | |
|
Default | 128 KB |
Watchdog Handling
- The device has 2 watchdogs WDTA and IWDT.
- The watchdogs are fed during flash programming.
Debugger Authentication
If necessary, a debugger authentication via RX ID Code is performed as part of the connect sequence.
See article on Renesas RX cores for further information.
Debug Mode
When using FINE interface, a debug mode is enabled as part of the connect sequence and disabled on debug session close.
Enabling / disabling the debug mode requires writing to the flash.
See article on Renesas RX cores for further information.
Supported debug interfaces
The following debug interfaces are supported:
- FINE