TDK-Micronas HVC 5x
Jump to navigation
Jump to search
The TDK-Micronas HVC 5x are Arm Cortex-M3 CPU based microcontroller for motor-controll applications.
Flash Banks
HVC 5481G, HVC 5422D
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Program flash | 0x00200000 |  |
|
Default | 64 KB |
| NVR flash | 0x00290000 | |
|
Default | 1 KB |
| EEPROM | 0x002A0000 | |
|
Default | 2 KB |
HVC 5223C, HVC 5222C, HVC 5221D, HVC 5221D
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Program flash | 0x00200000 | |
|
Default | 32 KB |
| NVR flash | 0x00290000 | |
|
Default | 256 KB |
| EEPROM | 0x002A0000 | |
|
Default | 512 KB |
HVC 5220D, 5222D
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Program flash | 0x00200000 | |
|
Default | 32 KB |
| NVR flash | 0x00290000 | |
|
Default | 1 KB |
| EEPROM | 0x002A0000 | |
|
Default | 2 KB |
Watchdog Handling
- The device has a watchdog WWDG(Window Watchdog).
- If the watchdog is enabled, it is turned off during flash programming and turned back on afterwards.
Device Specific Handling
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.
Security
- The device has a readout protection located at 0x00200020, which has to be 0xFFFFFFFF in order to be disabled.