Renesas RX62T
Jump to navigation
Jump to search
The Renesas RX62T are microcontrollers from Renesas, which are based on the RXv1 architecture.
Flash Banks
R5F562TAxxxx devices
| Flash Bank | Base address | J-Link Support | Loader | |
|---|---|---|---|---|
| Name | Size | |||
| Internal flash[1] | 0x00100000 | 
|
Default | 288 KB |
- ↑
The flash bank "Internal flash" internally functions as two flash banks.
One bank at 0x00100000 (32 KB) and one bank at 0xFFEC0000 (256 KB).
R5F562T7xxxx devices
| Flash Bank | Base address | J-Link Support | Loader | |
|---|---|---|---|---|
| Name | Size | |||
| Internal flash[1] | 0x00100000 |
|
Default | 136 KB |
- ↑
The flash bank "Internal flash" internally functions as two flash banks.
One bank at 0x00100000 (8 KB) and one bank at 0xFFEE0000 (128 KB).
Debugger Authentication
If necessary, a debugger authentication via RX ID Code is performed as part of the connect sequence.
See article on Renesas RX cores for further information.
Debug Mode
When using FINE interface, a debug mode is enabled as part of the connect sequence and disabled on debug session close.
Enabling / disabling the debug mode requires writing to the flash.
See article on Renesas RX cores for further information.
Supported debug interfaces
The following debug interfaces are supported:
- JTAG
- FINE