Microchip PIC32CM PL10
Jump to navigation
Jump to search
The Microchip PIC32CM_PL10 are Cortex-M0+ based microcontrollers.
Supported devices
Refer to the supported device list for a full list of all supported [DEVICE_FAMILY] family devices, their corresponding names and connection diagrams.
Target interfaces
| Interface | J-Link support | Flasher support |
|---|---|---|
| SWD |  |
|
Flash banks
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Internal Flash | 0x0C000000 | |
|
Default | Up to 128 KB |
| BOOTCFG | 0x0D000400 | |
|
Default | 512 B |
Watchdog handling
- The device has a watchdog WDT.
- The watchdog is fed during flash programming.
Device specific handling
Connect
- On connect, it is checked whether the BOOTROM recognized the debugger (hot-plugging)
- If the debugger is not recognized, a cold-plugging procedure is started. For this, the core is reset and released via the BOOTROM.
Reset
- The device uses a custom reset, as it runs BOOTROM afte reset. The reset is implemented by running a cold-plugging procedure, followed by exiting BOOTROM into park mode.
Attach
Attach is a debugging feature which exclusively applies to J-Link and J-Trace and does not apply to Flasher.
- Attach is supported only if hot-plugging works by default. This is generally the case when a valid application is running from flash.