J-Trace PRO RISC-V

This page contains the general, specifications as well as an overview of supported software features of the SEGGER J-Trace PRO RISC-V.
For information on the mechanical and electrical specifications as well as an overview of hardware features refer to Hardware Models.

Hardware Models

• J-Trace PRO RISC-V V4

Legacy

• J-Trace PRO RISC-V V3

Hardware Features

Feature	Supported	Since
USB 2.0 Hi-Speed		V3
USB 3.0 SuperSpeed		V3
WinUSB		V3
Gigabit-Ethernet		V3
cJTAG interface		V3
cJTAG interface without/buggy KEEPER logic		V3
JTAG interface		V3
SWD interface		V3
SWO interface
ETB Trace Cortex		V3
ETM Trace Cortex	{{NO	V3
PTM Trace Cortex		V3
N-Trace BTM RISC-V		V3
Streaming Trace		V3
VCOM
Memory Stop mode support		V3
Cortex-M Monitor Mode debugging		V3
5 V Target Supply		V3
SWD Multi-Drop		V3
CMSIS-DAP v1 (HID) mode

Supported cores

J-Trace provides debugging support for the following cores.

Note:
If you are interested in J-Trace support for a core that is not listed here, please feel free to request support via the SEGGER support ticket system.

Core	Supported	Since
RISC-V
RV32		V3
RV64		V3