J-Trace PRO RISC-V
Jump to navigation
Jump to search
This page contains the general, specifications as well as an overview of supported software features of the SEGGER J-Trace PRO RISC-V.
For information on the mechanical and electrical specifications as well as an overview of hardware features refer to Hardware Models.
Hardware Models
Hardware Features
| Feature | Supported | Since |
|---|---|---|
| USB 2.0 Hi-Speed |  |
V3 |
| USB 3.0 SuperSpeed | |
V3 |
| WinUSB | |
V3 |
| Gigabit-Ethernet | |
V3 |
| cJTAG interface | |
V3 |
| cJTAG interface without/buggy KEEPER logic | |
V3 |
| JTAG interface | |
V3 |
| SWD interface | |
V3 |
| SWO interface |  |
|
| ETB Trace Cortex | |
|
| ETM Trace Cortex | |
|
| PTM Trace Cortex | |
|
| N-Trace BTM RISC-V | |
V3 |
| Streaming Trace | |
V3 |
| VCOM | |
|
| Memory Stop mode support | |
V3 |
| ARMv7-M Monitor Mode debugging | |
|
| ARMv8-M Monitor Mode debugging | |
|
| 5 V Target Supply | |
V3 |
| SWD Multi-Drop | |
|
| CMSIS-DAP v1 (HID) mode | |
Supported cores
J-Trace provides debugging support for the following cores.
Note:
If you are interested in J-Trace support for a core that is not listed here, please feel free to request support via the SEGGER support ticket system.
If you are interested in J-Trace support for a core that is not listed here, please feel free to request support via the SEGGER support ticket system.
| Core | Supported | Since |
|---|---|---|
| RISC-V | ||
| RV32 | |
V3 |
| RV64 | |
V3 |