WCH CH32F2
Jump to navigation
Jump to search
The WCH CH32F2 are Cortex-M3 based MCUs.
Flash Banks
Code Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| Code Flash | 0x08000000 | 32KB - 256KB | 
|
Watchdog Handling
- The device has a watchdog that is fed during flash programming.
Erase Value
- The device has a special erase value that is 0x39 on even address byte reads and 0xe3 on odd address byte reads.
Device Specific Handling
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.
Minimum requirements
- J-Link software V8.10i or later