NXP i.MX RT700: Difference between revisions
Jump to navigation
Jump to search
m (Matthias moved page NXP i.MXRT700 to NXP i.MX RT700) |
No edit summary |
||
| Line 5: | Line 5: | ||
===QSPI Flash=== | ===QSPI Flash=== | ||
QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the [[QSPI Flash Programming Support | QSPI Flash Programming Support article]].<br> | QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the [[QSPI Flash Programming Support | QSPI Flash Programming Support article]].<br> | ||
For a complete list of supported flash devices, please refer to the [https://www.segger.com/products/debug-probes/j-link/technology/cpus-and-devices/supported-spi-flashes/ Supported SPI Flashes] page on our website. | |||
{| class="seggertable" | {| class="seggertable" | ||
|- | |- | ||
Revision as of 09:48, 2 May 2025
The NXP i.MXRT700 are multi-core MCUs consisting of two Cortex-M33 and one RISC-V cores.
Flash Banks
QSPI Flash
QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the QSPI Flash Programming Support article.
For a complete list of supported flash devices, please refer to the Supported SPI Flashes page on our website.
| Bank | Base address | Maximum size |
|---|---|---|
| XSPI1 | 0x08000000 | 128 MB |
| XSPI0 | 0x28000000 | 128 MB |
Watchdog Handling
- The watchdogs WWDT0 and WWDT1 are fed during flash programming.
Multi-Core Support
Before proceeding with this article, please check out the generic article regarding Multi-Core debugging here.
The i.MXRT700 family comes with multiple cores, of which the following are supported:
| Core | J-Link Support |
|---|---|
| Cortex-M33 (CPU0) | 
|
| Cortex-M33 (CPU1) |
|
| RISC-V (EZH-V) |
|
Device Specific Handling
Connect
Debug access is enabled through debug mailbox.
Reset
The device uses custom reset to ensure that the boot ROM is executed. Afterwards debug access is reenabled.