Template:ST SR6Px MultiCoreSupport CL0

From SEGGER Knowledge Base
Jump to navigation Jump to search

Before proceeding with this article, please check out the generic article regarding Multi-Core debugging here.
The {{{1}}} family comes with {{{2}}} Cortex-R52 and {{{3}}} Cortex-M4 cores. Some of them are available with enabled split lock mode, only.
Please refer to the reference manual.
In below, the debug related multi-core behavior of the J-Link is described for each core:

Cluster 0 Core 0 Cortex-R52

Init/Setup

  • WDT is enabled by default. If it is enabled, it will be disabled.

Reset

  • ARMv8-R Reset is performed like described here.
  • Initializes 256KB ECC RAM starting at 0x60000000
  • WDT is enabled by default. If it is enabled, it will be disabled.

Attach

  • Attach is supported if WorkRAM init is skipped.

Cluster 0 Core 1 Cortex-R52

Init/Setup

  • WDT is enabled by default. If it is enabled, it will be disabled.
  • If core is not enabled, it will be enabled (set to DRUN condition).

Reset

  • ARMv8-R Reset is performed like described here.

Attach

  • Attach is supported