Template:FW Info Versioning

This template is used to share information between articles on J-Link/ Flasher firmware.

Parameters

Parameters may be passed in any order, when specified directly.

Parameter	Meaning	Example value	Default
JLinkOrFlasher	Should be either "J-Link" or "Flasher"	J-Link	---

Implementation

The {{{JLinkOrFlasher}}} firmware version is a string that is formatted as follows:

<Firmware type> compiled <build timestamp>

e.g.:

{{{JLinkOrFlasher}}} PRO V5 compiled Jul  3 2024 17:00:40

Each version of the {{{JLinkOrFlasher}}} software is shipped with a firmware image for each model. These images are of the most recent version at the time of the software release and are referred to as host firmware.
The host firmware version may not change between releases of the {{{JLinkOrFlasher}}} software if there were no changes to the respective firmware build.
Example:
V7.98e of the {{{JLinkOrFlasher}}} software was released on 21st of August 2024. So it will contain the most recent firmware versions (as of the 21st of August 2024) for all models.
At the time of that release, the most recent firmware version for J-Link PRO V5 was built on 18th of July 2024 at 11:29 .

Note:
For more information on the software versioning (e.g. "V7.98e"), see {{{JLinkOrFlasher}}} software versioning.

Probe/ programmer and host firmware versions shown in {{{JLinkOrFlasher}}} Configurator

{{{JLinkOrFlasher}}} Configurator can be used to check the host firmware version (see Host firmware column) as well as the version of the firmware currently used by a probe/ programmer (see Probe/ Programmer firmware column).