TI AWR2944EVM
Jump to navigation
Jump to search
This article describes specifics for the TI AWR2944EVM evaluation board.
Preparing for J-Link
- Connect the J-Link with the SEGGER MIPI-60 adapter to the 60-pin J19 header (MIPI_CONN) on the board.
- Relevant switch / jumper settings:
| Switch / Jumper | Setting |
|---|---|
| S1.1 (JTAG_MUX) | MIPI |
| J17 (SOP2) | Open |
| J18 (SOP1) | Open |
| J19 (SOP0) | Closed |
- Power the board with 12V via J12 jack connector
- Verify the Connection with J-Link Commander. The output should look as follows:
