SinoWealth SH33F2801

This article describes specifics for the SinoWealth SH33F2801 evaluation board.
File:SH33F2801.jpg

Preparing for J-Link

• Power the board via JP1.
• Connect the J-Link to the Debug Pins JP8.
• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the SinoWealth SH33F2801.
It is a simple Hello World sample linked into the internal flash.

SETUP

• Embedded Studio: V8.24
• Hardware: SinoWealth SH33F2801
• Link: File:SinoWealth SH33F2801 TestProject ES V824.zip