ST SR6G7-EVBC6000P

From SEGGER Knowledge Base
Jump to navigation Jump to search

This article describes specifics for the ST SR6G7-EVBC6000P evaluation board.
ST SR6G7-EVBC6000P SR6G7C8 board.jpg

Preparing for J-Link

  • Connect the J-Link to P9.
  • Power the board via J6 (12V).
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

ST SR6G7-EVBC6000P SR6G7C8 connect.png

Retrieved from "https://kb.segger.com/index.php?title=ST_SR6G7-EVBC6000P&oldid=19240"