SinoWealth SH33F2053 EMC Board V2.0

From SEGGER Knowledge Base
(Redirected from SH33F2053 EMC Board V2.0)
Jump to navigation Jump to search

This article describes specifics for the SinoWealth SH33F2053 EMC Board V2.0 evaluation board.
File:ST SH33F2053-DK.jpg

Preparing for J-Link

  • Power the board via JP1.
  • Connect the J-Link to the Debug Pins JP8.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Connect SinoWealth SH33F2053.png


Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the SinoWealth SH33F2053.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://kb.segger.com/index.php?title=SinoWealth_SH33F2053_EMC_Board_V2.0&oldid=25773"