Renesas RA6T1
Jump to navigation
Jump to search
The Renesas RA6T1 series are microcontrollers based on Cortex-M4.
Internal Flash
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Internal program flash | 0x00000000 |  |
|
Default | Up to 512 KB |
| Internal option-setting memory[1] | 0x0100A150 | |
|
Default | 32 B |
| Internal data flash | 0x40100000 | |
|
Default | 8 KB |
- ↑ Please note that the full 32 bytes must be provided in the data file for the option-setting memory when using Flasher's stand-alone mode. Gaps are not allowed.
Limitations
Security
- The device has a debug locking feature based on the 128 bit IDCODE, programmed into option-setting memory.
- During connection, the user will be asked to specify the IDCODE code to unlock debugging access if it was previously programmed.
- Use the following IDCODE to send the ALeRASE command, which triggers erasure of the user flash (code and data) area and the configuration area: FFFFFFFFFFFFFFFFFF45534152654C41
- Important: Make sure the byte order of the ALeRASE command is correct, as above shown above. A common mistake is using the wrong byte order, which will cause the command to fail.
Evaluation Boards
For further information regarding available EvalBoards as well as the flash algorithm, please refer to the following page: