Nuvoton NUC1263
Jump to navigation
Jump to search
The Nuvoton NUC1263 series are 32-bit microcontrollers with a maximum clock of 72MHz based on the ARM Cortex-M23.
Supported devices
Refer to the supported device list for a full list of all supported NUC1263 family devices, their corresponding names, and connection diagrams.
Target interfaces
| Interface | J-Link support | Flasher support |
|---|---|---|
| SWD |  |
|
Flash banks
Internal flash
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| APROM | 0x00000000 | |
|
Default | 64KB |
| LDROM | 0x00100000 | |
|
Default | 4KB |
| SPROM | 0x00200000 | |
|
Default | 2KB |
Watchdog handling
These devices have two toggleable watchdogs, WTD and WWTD. If active, they are fed during flash programming.
Device specific handling
Reset
These devices use the normal Cortex-M reset without any special handling.
Attach
Attach is supported.
Memory-mapped reads
Depending on the device's boot configuration in CONFIG0[7:6], certain flash banks may only be read through the ISP.