NXP X-FRDM-MCX W7x

From SEGGER Knowledge Base
Jump to navigation Jump to search

This article describes specifics for the X-FRDM-MCX W7x evaluation board.
NXP X-FRDM-MCX W7x K32W14 board.jpg

Preparing for J-Link

  • Connect the J-Link to J12.
  • Power the board via J10.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

NXP X-FRDM-MCX W7x K32W14 connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the X-FRDM-MCX W7x.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://kb.segger.com/index.php?title=NXP_X-FRDM-MCX_W7x&oldid=20373"