NXP FRDM-MCXL255
Jump to navigation
Jump to search
This article describes specifics for the NXP FRDM-MCXL255 evaluation board.
Preparing for J-Link
- Connect the J-Link to debug header (J17)
- Power the board via 5V USB (J20)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP FRDM-MCXL255.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V8.24
- Hardware: NXP FRDM-MCXL255
- Link: File:NXP FRDM MCXL255 TestProject ES V824.zip