Microchip SAMA7D65-Curiosity

From SEGGER Knowledge Base
Jump to navigation Jump to search

This article describes specifics for the Microchip SAMA7D65-Curiosity evaluation board.
Microchip SAMA7D65-Curiosity.jpg

Preparing for J-Link

  • Connect the J-Link to J37 (JTAG)
  • Power the board via J3 (USB A)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MICROCHIP SAMA7D65 CONNECT.PNG

Retrieved from "https://kb.segger.com/index.php?title=Microchip_SAMA7D65-Curiosity&oldid=25558"