Microchip CuriosityPro PIC32CMLS60

This article describes specifics for the Microchip Curiosity Pro PIC32CMLS60 evaluation board.

Preparing for J-Link

• Connect the J-Link to J400.
• Power the board via J200.
• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Microchip Curiosity Pro PIC32CMLS60.
It is a simple Hello World sample linked into the internal flash.

SETUP

• J-Link software: V7.86c
• Embedded Studio: V6,34
• Hardware: Microchip Curiosity Pro PIC32CMLS60
• Link: File:Microchip CuriosityPro PIC32CMLS60 TestProject ES 6V34.zip