Kinetis KE1xZ 48 MHz series
Jump to navigation
Jump to search
The NXP Kinetis KE1xZ 48 MHz series is designed for white goods and industrial applications. It incorporates an ARM Cortex-M0+ core.
J-Link support
The KE14Z32, KE14Z64, KE15Z32, KE15Z64, KE16Z32, KE16Z64 are supported since the following J-Link software versions:
- V6.35g (beta) or later: Download latest beta
- V6.36 (release) or later: Download latest release
Watchdog support
Debugging and flash programming with the watchdog (WDOG) being enabled (in non-windowed mode) is supported. Windowed mode of the watchdog is not supported for debugging and flash programming.
MTB trace
The KE1xZ 48 MHz series devices incorporate an ARM MTB on-chip trace buffer that allows instruction backtrace. For more information about MTB in general, please refer to here: Article MTB.
Example projects
Requirements
The following are the min. requirements to run the example project:
- SEGGER Embedded Studio V3.52 or later
- J-Link software V6.36 or later. (Install after Embedded Studio and let J-Link installer update the Embedded Studio installation)
- Board: FRDM-KE16Z