J-Link BASE Compact V11

This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER J-Link BASE Compact V11.
For information on the general specifications as well as an overview of supported software features refer to J-Link BASE.

Note:

The J-Link BASE Compact V11 has been superseded and as such is considered a legacy device. This device is not eligible for support by SEGGER. Refer to the J-Link Model Overview for a list of most recent devices by SEGGER.
We recommend to make use of the SEGGER Trade-In-Program to upgrade to the current version of the product.

When new features are added, articles for legacy models may not be updated.

So if a feature is not mentioned here at all, it can be assumed as "not supported".

Hardware Features

Feature	Supported
USB 2.0 Full Speed
USB 2.0 Hi-Speed
WinUSB
JTAG interface
cJTAG interface
cJTAG interface without/buggy KEEPER logic
SWD interface
SWO interface
SPI interface
QSPI interface
Microchip ICSP interface
Renesas FINE interface
SiLabs C2 2-wire interface
ETB Trace ARM7/9
ETB Trace Cortex-M
ETB Trace Cortex-A/R
ETM Trace Cortex-M
VCOM
Memory Stop mode support
Cortex-M Monitor Mode debugging
SWD Multi-Drop
CMSIS-DAP v1 (HID) mode

Interface speeds

Interface	Max. speed
VCOM	115200 Bd [1]

Note:

^[1] The max. baudrate for J-Link depends on the configured Eco mode:

Eco mode	Max. baudrate
Normal	115200 Bd
Eco	57600 Bd
Eco Plus	28800 Bd
Eco Max	28800 Bd