Infineon CY8CPROTO-041TP
Jump to navigation
Jump to search
This article describes specifics for the Infineon CY8CPROTO-041TP evaluation board.
File:Infineon CY8C4146LQI-T403 CY8CPROTO-041TP board.jpg
Preparing for J-Link
- Connect the J-Link to J5.
- Power the board via J22.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Infineon CY8CPROTO-041TP.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V7.20
- Hardware: Infineon CY8CPROTO-041TP
- Link: File:Infineon CY8C4147AZQ-T495 TestProject ES 7V20.zip