Holtek HT32F5
Jump to navigation
Jump to search
The Holtek HT32F5 are Cortex-M0-based microcontrollers.
Supported devices
Refer to the supported device list for a full list of all supported HT32F5 family devices, their corresponding names and connection diagrams.
Target interfaces
| Interface | J-Link support | Flasher support |
|---|---|---|
| JTAG |  |
|
| SWD | |
|
Flash banks
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Internal flash | 0x00000000 | |
|
Default | Up to 256 KB |
| Option bytes | 0x1FF00000 | |
|
Default | Up to 1 KB |
Watchdog handling
- The device has a watchdog WDT.
- The watchdog is fed during flash programming.
- If the watchdog is enabled, it is fed during flash programming.
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.
Attach
Attach is a debugging feature which exclusively applies to J-Link and J-Trace and does not apply to Flasher.
- Attach is supported