HSXP HK32F030M
Jump to navigation
Jump to search
The HSXP HK32F030M/0301M is a HK32F030 evaluation board.
Minimum requirements
J-Link software V7.60c or later
Preparing for J-Link
| Board Pin | J-Link Pin |
|---|---|
| GND | GND (Pin 4) |
| 3.3V | VTref (Pin 1) |
| DIO | SWDIO (Pin 7) |
| CLK | SWDCLK (Pin 9) |
| RST | RESET (Pin 15) |
- Connect the J-Link to the SWD header (CN1) on the right side with jumper cables as listed above.
- Power the board via the USB connector (CN2)
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the HSXP HK32F030M /HK32F0301M. It is a simple Hello World sample linked into the internal flash.
Setup
- J-Link software: V7.60c
- Embedded Studio: V5.50d
- Hardware: HSXP HK32F030M/0301M
- File:HSXP HK32F030xx TestProject ES V550d.zip