Flasher Portable PLUS V6
Jump to navigation
Jump to search
This page contains the mechanical and electrical specifications of the SEGGER Flasher Portable PLUS V6.
For information on the general specifications as well as an overview of supported software features refer to Flasher Portable PLUS.
Specifications
| Specification | Value |
|---|---|
| Power supply | Via internal lithium-ion rechargeable battery (Panasonic/Sanyo UR14500AC) or USB |
| Charging via USB | 70 minutes (at 1 A charging current) |
| USB host interface | USB 2.0 (High-Speed), USB Type B |
| Target interface | Male 20-pin IDC keyed box header with 0.1" pitch (2.54mm), optional adapters available |
| Internal flash memory | 128 MB (TBW: 10 TB) |
| Screen display | 1.8" 128x160 px RGB TFT LED backlight |
| Max. target cable length | Recommended (delivered): 20 cm (8") Max. 2 m (6.5") allowed but might reduce max. target interface speed. |
| Serial transfer rate between Flasher Portable PLUS and target | Up to 50 MHz |
| Supported target voltage | 1.2V - 5V |
| Current drawn from target voltage sense pin (VTRef) | < 25µA |
| Target supply voltage | 5V |
| Target supply current | Max. 400mA |
| Reset type | Open drain with 100 Ohms series resistor. Can be pulled low or tristated |
| Operating temperature | + 5°C ... + 60°C (Normal operation) + 5°C ... + 45°C (Battery charging) |
| Storage temperature | - 20°C ... + 45°C |
| Relative humidity (non-condensing) | < 90 % rH |
| Size (without cables) | 126mm x 70mm x 28mm |
| Weight (without cables) | 140g |
| Supported OS | Microsoft Windows (x64/Arm), Linux (x64/Arm), macOS (x64/Apple Silicon) |