AmbiqMicro Apollo510
(Redirected from Apollo5)
The Ambiq Apollo510, Apollo510B and Apollo510L are SoC based on the ARM Cortex-M55 processor.
Supported devices
Refer to the supported device list for a full list of all supported Apollo510 family devices, their corresponding names and connection diagrams.
Target interfaces
| Interface | J-Link support | Flasher support |
|---|---|---|
| SWD |
Flash banks
[AP510, AP510B]
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Secure Boot Loader | 0x00400000 | - | Up to 64 KB | ||
| Non-secure internal flash [1] | 0x00410000 | Default | Up to 4032 KB | ||
[AP510L]
| Flash bank | Base address | J-Link support | Flasher support | Loader | |
|---|---|---|---|---|---|
| Name | Bank size | ||||
| Secure Boot Loader | 0x00400000 | - | Up to 64 KB | ||
| Non-secure internal flash [1] | 0x00410000 | Default | Up to 1984 KB | ||
Note:
This device supports program without erase. More information can be found here.
This device supports program without erase. More information can be found here.
Watchdog Handling
- The device has a watchdog that is fed during flash programming.
Device Specific Handling
Reset
- The device uses custom reset as the Bootloader needs to run first.
Attach
- Attach is supported.
Limitations
- At the moment Flasher standalone mode is not supported. If standalone mode support is required, please get in contact with us: https://support.segger.com/
Evaluation boards
Example application
- AmbiqMicro Apollo510 EVB binary counter
- AmbiqMicro Apollo510 Lite Series EVB hello world