J-Trace PRO RISC-V V3
Jump to navigation
Jump to search
This page contains the mechanical and electrical specifications of the SEGGER J-Trace PRO RISC-V V3.
For information on the general specifications as well as an overview of supported software features refer to J-Trace PRO Cortex.
Specifications
| Specification | Value |
|---|---|
| General | |
| Supported OS | Microsoft Windows (x86/x64), Linux (x86/x64/Arm), macOS (x86/Apple M1) |
| Electromagnetic compatibility (EMC) | EN 55022, EN 55024 |
| Operating temperature | +5°C ... +60°C |
| Storage temperature | -20°C ... +65 °C |
| Relative humidity (non-condensing) | Max. 90% rH |
| Mechanical | |
| Size (without cables) | 123mm x 68mm x 30mm |
| Weight (without cables) | 120g |
| Available interfaces | |
| Ethernet interface | Gigabit |
| USB interface | USB 3.0, SuperSpeed |
| Target interface | JTAG/SWD 20-pin (14-pin adapter available) JTAG/SWD + Trace 19-pin |
| JTAG/SWD Interface, electrical | |
| Power supply | USB-powered (max. 400mA) |
| Target interface voltage (VIF) | 1.2V ... 5V |
| LOW level input voltage (VIL) | VIL <= 40% of VIF |
| HIGH level input voltage (VIH) | VIH >= 60% of VIF |
| Reset Type | Open drain. Can be pulled low or tristated. |
| JTAG/SWD Interface, Timing | |
| Data input rise time (Trdi) | Trdi <= 20ns |
| Data input fall time (Tfdi) | Tfdi <= 20ns |
| Data output rise time (Trdo) | Trdo <= 10ns |
| Data output fall time (Tfdo) | Tfdo <= 10ns |
| Clock rise time (Trc) | Trc <= 10ns |
| Clock fall time (Tfc) | Tfc <= 10ns |
| Trace interface, electrical | |
| Power supply | USB-powered (max. 400mA) |
| Target interface voltage (VIF) | 1.2V ... 5V |
| LOW level input voltage (VIL) | VIL <= 40% of VIF |
| HIGH level input voltage (VIH) | VIH >= 60% of VIF |
| Capacitive load | 3 pF J-Trace + 8 pF cable (typical) |
| Trace interface | |
| Max. trace clock frequency | 150 MHz |