HPMicro HPM6P
Jump to navigation
Jump to search
The HPMicro HPM6Pxx device series are RISC-V based 32-bit microcontrollers.
SPI flash support
J-Link supports SPI-flashes with HPM6Pxx through the XPI-API.
Note:
Since the full documentation is currently not available, the flashloader is based on code provided by HPMicro. This currently has the limitation where programming is only supported after reset. Programming and flash breakpoints may work without reset, but it is not guaranteed. In such cases, SEGGER will currently not provide any support.
Since the full documentation is currently not available, the flashloader is based on code provided by HPMicro. This currently has the limitation where programming is only supported after reset. Programming and flash breakpoints may work without reset, but it is not guaranteed. In such cases, SEGGER will currently not provide any support.
Limitations
The SPI flash size is not determined automatically in J-Flash. Functions, which try to access addresses outside of the flash boundaries will fail.