Renesas RZ/N2H-RSK

From SEGGER Knowledge Base

Revision as of 09:41, 6 February 2025 by Matthias (talk | contribs) (Created page with "Category:Evalboards __TOC__ This article describes specifics for the Renesas RZ/N2H evaluation board.<br> 450px == Preparing for J-Link == * Connect the J-Link to CN23 or CN24. * Power the board via CN35. * Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: File:Renesas_RZN2H_Evaluatio...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This article describes specifics for the Renesas RZ/N2H evaluation board.

Preparing for J-Link

Connect the J-Link to CN23 or CN24.
Power the board via CN35.
Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Retrieved from "https://kb.segger.com/index.php?title=Renesas_RZ/N2H-RSK&oldid=23595"

Evalboards