View source for USB-C - Connection Issue

Some debug probes and flash programmers might refuse to power up when operated on an electronically marked USB type C cable. The USB type C host port will not detect the debug probe/flash programmer and therefor will not provide power to the port.

Electronically marked USB type C cables are typically used for cables with an increased current carrying capability beyond 3 A or for long cables that require signal enhancement by electronic parts built in the cable.

The debug probes and flash programmers will work correctly when operated on an USB type C port that always provides bus power.<br>
The debug probes and flash programmers will work correctly when using an USB 2/3/4 type C cable that is not electronically marked.<br>

Affected debug probes and flash programmers:
{| class="seggertable"
|-
!Device!!HW Version!!S/N
|-
|J-Link BASE Compact||V12.1, V13.0||&ge; 822006013
|-
|J-Link PLUS Compact||V12.1, V13.0||&ge; 852005056
|-
|Flasher Compact||V6.0, V7.0||&ge; 1016000100
|-
|J-Link EDU Mini||V2.0||&ge; 802000000
|-
|}