View source for Nations N32H785XIB7 STB

[[Category:Evalboards]]
__TOC__

This article describes specifics for the Nations N32H785XIB7_STB evaluation board.<br>
[[File:Nations_N32H785XIB7_STB_board.JPG|450px]]

== Preparing for J-Link ==
*Connect the J-Link to this pins:
{| class="seggertable"
|-
! J-Link Pin || Connector !! Pin || Name
|-
| VTref || J11 || 2 || VDD
|-
| GND || J11 || 16 || GND
|-
| TMS/SWDIO || J11 || 4 || PA13
|-
| TCK/SWCLK || J11 || 6 || PA14
|-
| RESET || J11 || 12 || NRST
|-
|}
*Power the board via Mini-USB connector (J9)
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
[[File:Nations_N32H785XxB7EC_STB_connect.png|400px]]

== Example Project==
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Nations N32H785XIB7_STB.<br>It is a simple Hello World sample linked into the internal flash.<br>
====SETUP====
*Embedded Studio: V8.24
*Hardware: Nations N32H785XIB7_STB
*Link: [[File:Nations_N32H785XIB7_STB_TestProject_ES_V824.zip]]