View source for ESWIN EAM2011 FULLMASK EVB

[[Category:Evalboards]]
__TOC__

This article describes specifics for the ESWIN EAM2011_FULLMASK_EVB evaluation board.<br>
[[File:ESWIN_EAM2011_FULLMASK_EVB.jpg|450px]]

== Preparing for J-Link ==
*Connect the J-Link to 20-pin JTAG connector (J44).

*Power the board via the DC 12V power jack (J60).
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
[[File:ESWIN_EAM2011_CONNECT.PNG|400px]]

== Example Project==
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ESWIN EAM2011_FULLMASK_EVB.<br>It is a simple Hello World sample linked into the internal flash.<br>
====SETUP====
*Embedded Studio: V8.22a
*Hardware: ESWIN EAM2011_FULLMASK_EVB
*Link: [[File:ESWIN_EAM2011_TestProject_ES_V822a.zip]]