Flasher Pro V4

From SEGGER Knowledge Base
(Redirected from Flasher PRO V4)
Jump to navigation Jump to search

This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER Flasher Pro V4.


Note:

The Flasher Pro V4 has been superseded and as such is considered a legacy device. This device is not eligible for support by SEGGER. Refer to the Flasher Model Overview for a list of most recent devices by SEGGER.
We recommend to make use of the SEGGER Trade-In-Program to upgrade to the current version of the product.

When new features are added, articles for legacy models may not be updated.

So if a feature is not mentioned here at all, it can be assumed as "not supported".


Hardware and Software Features

Hardware version 4
Operating mode** S PC
Operating Mode** S = Standalone; PC = PC-based
Hardware Features
USB 2.0 Full Speed
Ethernet
JTAG interface
cJTAG interface
SWD interface
SWO interface
SPI interface
QSPI interface
Microchip PIC32 ICSP interface
Renesas FINE interface
SiLabs C2 2-wire interface
ETB Trace ARM7/9
ETB Trace Cortex-M
ETB Trace Cortex-A/R
ETM Trace Cortex-M
ETM Trace Cortex-A
VCOM
Memory Stop mode support
Cortex-M Monitor Mode debugging
SWD Multi-Drop
CMSIS-DAP v1 (HID) mode
ARM legacy Cores
ARM7
ARM9
ARM11
ARM Cortex Cores
Cortex-A5
Cortex-A7
Cortex-A8
Cortex-A9
Cortex-A12
Cortex-A15
Cortex-A17
Cortex-A53
Cortex-A57
Cortex-A72
Cortex-M0
Cortex-M0+
Cortex-M1
Cortex-M3
Cortex-M4
Cortex-M7
Cortex-M23
Cortex-M33
Cortex-R4
Cortex-R5
Cortex-R8
SC000 (M0 secure)
SC300 (M3 secure)
RISC-V
RV32
RV64
Microchip PIC32
PIC32MX
PIC32MZ
SiLabs 8051
EFM8
Renesas RX
RX110
RX111
RX210
RX21A
RX220
RX610
RX621
RX62G
RX62N
RX62T
RX630
RX631
RX63N
RX63T
RX64M